Veo Observer User Manual download pdf (Page 7)

VIPN1100 Veo Europe IP Netcam Manual rev 1.2 EN - 7

2. Installation

Before installing the Observer IP NetCam, you should have an available Ethernet LAN

connection (RJ-45 port). To view the camera’s image or make any manual configuration

changes, you will need a Windows PC with Internet Explorer 5.0 or higher and connection to

the LAN.

2-1. Observer IP NetCam Hardware Setup

1. Insert the power-cord to Observer IP NetCam.

2. Insert the Network Line to Observer IP NetCam and Computer LAN Card RJ-45 port (Red

color LAN Cable).

3. Power-On the Computer for IP setup.

4. Use the IPEdit.exe tools to find the Observer IP NetCam.

5. Use IE to view the Observer IP NetCam image.

Step 1

Plug the Ethernet cable into

Observer IP

NetCam

Plug the included RED Color Ethernet cable into the

RJ- 45 connector at the back of the camera as

shown.

Step 2. Plug the Ethernet cable into PC

1. Temporarily disconnect the existing network

cable from the PC.

2. Plug the other end of the Ethernet cable into any

available LAN port. A typical home

router/gateway connection is shown on the left.

Step3.Connect the Power Supply to the

Observer IP Net Cam

Connect the power supply to the back of the

Observer IP Net Cam as shown, and then plug

the supply into an available power outlet.

1 2 3 4 5 6 7 8 9 10 11 12 ... 29 30

No comments

Veo Observer User Manual Page 7